-
Type:
Story
-
Status: Implemented (View Workflow)
-
Priority:
Normal
-
Resolution: Fixed
-
Affects Version/s: None
-
Fix Version/s: 1.7
-
Component/s: Appendix
-
Labels:None
For JDF there is no LooseBinding process.
However, the encoding appendix has two cases
- Comb and Coil Shapes
I suggest this refers to the JDF CoilBinding process. There is no specific CoilBinding but there is a WireCoilBinding process. Perhaps the reference should be to both processes. - Device Classes table - GathererBinder entry.
Again reference should be made to the appropriate JDF process(es).
7.5.22 WireCombBinding
| Name | Data Type | Description |
|---|---|---|
| WireCombShape ? Modified in JDF 1.6 |
NameSpan | The shape of the wire comb. Allowed values include: are from: Comb and Coil Shapes Single – Each “tooth” is made with one wire. SingleCalendar – Each “tooth” is made with one wire and an extension for hanging the bound product is provided in the center. New in JDF 1.6 Twin – The shape of each “tooth” is made with a double wire. TwinCalendar – The shape of each “tooth” is made with a double wire and an extension for hanging the bound product is provided in the center. New in JDF 1.6 |
8.175 WireCombBindingParams
| Name | Data Type | Description |
|---|---|---|
| Shape="Single" Modified in JDF 1.6 |
NMTOKEN | The shape of the wire comb. Allowed value is from: Comb and Coil Shapes Values include: Single – Each “tooth” is made with one wire. SingleCalendar – Each “tooth” is made with one wire and an extension for hanging the bound product is provided in the center. New in JDF 1.6 Twin – The shape of each “tooth” is made with a double wire. TwinCalendar – The shape of each “tooth” is made with a double wire and an extension for hanging the bound product is provided in the center. New in JDF 1.6 |
A.5.1 Comb and Coil Shapes {JDF Only}
When specifying the shape of a comb or coil for LooseBindingWireCombBinding, values from the following table are recommended.
A.5.5. Device Classes {JDF Only}
| Value | Description |
|---|---|
| GathererBinder | A device that performs the Gathering and LooseBinding one of the binding processes described in Section 6.7.1.3 Binding Methods . A gatherer binder can be used to collect sheets into collated piles that are then bound. |