Revive PrintCondition for XJDF

Table 5.1: Generic Input ResourceSets PrintCondition ? PrintCondition SHALL specify the target print condition for a given printing process. 8.117 PrintCondition PrintCondition is used to describe the target print condition for a given printing process. Table 8.213: PrintCondition Resource ColorantOrder NMTOKENS ColorantOrder SHALL specifiy the complete list of colorant identifiers or full coatings that can be applied when printing according to this PrintCondition. The first colorant or coating in the list SHALL be applied first. Additional details of the colorants SHOULD be provided in a ResourceSet [@Name="Color"] . Note: ColorOrder can contain colorants that will be printed although not present in the PDL. Examples include full coatings or light colorants such as light cyan that are internally selected by the printer. Name NMTOKEN <copy from ColorIntent/SurfaceColor@PrintStandard> PrintQuality ? ... <copy from InterpretingParams> <deprecate InterpretingParams/@PrintQuality and reference this in deprecation note> <deprecate Color/@PrintCondition and reference this in deprecation note> ============= draft 2 ============= <deprecate Color/@PrintStandard ? and reference this in deprecation note> PrintCondition ? NMTOKEN @PrintCondition specifies a characterization data set that is applied to a specific setup including paper selection and screening. See Appendix A.3.17 PrintStandard Characterization Data Sets ##ref PrintCondition for details of characterization data sets. ================ draft 3 ================ 6.69 PrintCondition PrintCondition is used to describe the target print condition for a given printing process. At least one Resource/Part/@PrintCondition SHALL be specified for each ResourceSet [@Name="PrintCondition"] /Resource and SHALL be unique in a workflow. Table 8.213: PrintCondition Resource ColorantOrder ? ... ColorantOrder SHALL specify the number and order of Colorants including primers and varnishes for this print condition. Note: ColorantOrder is a description of the PrintCondition and mainly used for filtering in queries. Name ... @Name SHALL identify the print condition. Note: The print condition will typically be dependent of the general print substrate class but will typically have multiple variants which are dependent on the details of the individual print substrate. See Part/@PrintCondition. PrintQuality ? ... ... Note: PrintQuality is a description of the PrintCondition and mainly used for filtering in queries.