We should have an enumeration (or NMTOKEN) that defines the type of QualityControl so that we don't have to rely on DescriptiveName or ExternalID
Table 6.146: QualityControlParams Resource
|QualityControlMethods ?||NMTOKENS||QualityControlMethods SHOULD be provided and SHALL specify the types of quality control method.
Modification note: It is strongly recommended to provide QualityControlMethods. The only reason that QualityControlMethods is not required is because of backwards compatibility with earlier versions of JDF/XJDF.
Table 6.148: QualityControlResult Resource
|QualityControlMethods ?||NMTOKENS||QualityControlMethods SHOULD be provided and SHALLSHALL specify the types of quality control method that was used for the measurements.
<copy note from above>
Quality control methods
|Barcode||A Barcode quality test measures whether a printed barcode adheres to the technical requirements for a barcode of that type.|
|BindingPull||Binding quality test that measures the force required to pull out a bound page.|
|BindingFlex||Binding quality test that measures the number of times a page can be turned before the binding fails.|
|ColorDensitometry||Color quality test that measures color density.|
|ColorSpectrophotometry||Color quality test that measures spectral reflectance.|
|Colorimetry||Color quality test that measures color metrics according to ##ref CIE. http://www.cie.co.at/|
|Inspection||Generic inspection of a given Component. The result of an inspection is typically a list of defects. Inspection includes visual inspection by a human being.|
|Registration||A separation registration test measures the registration offset of color separations respective to a master separation.
Note: front to back registration and any other registrations such as finishing registration or image to sheet registration are covered by Inspection.
|Structural||A Structural test that measures the structural stability of finished products such as boxes.|